1) In memory management, a technique called as paging, the physical memory is broken into fixed sized blocks called .........
A. pages
B. frames
C. blocks
D. segments
2) Which method is used to recover from deadlock?
A. Process termination
B. Resource preemption
C. Resource non-preemption
D. Process termination and Resource preemption
3) Saving the state of the old process and loading the saved state of the new process is called ....
A. context switch
B. static
C. multi programming
D. none of the above
4) The degree of Multiprogramming is controlled by ......
A. CPU scheduler
B. context switching
C. long term scheduler
D. medium term scheduler
5) Input transfers are done in advance and output transfers are done after sometimes in which of these technique?
A. Spooling
B. Buffering
C. Swapping
D. Paging
6) A binary semaphore .........
A. has the values one or zero
B. is essential to binary computers
C. is used only for synchronization
D. is used only for mutual exclusion
7) A scheduling algorithm is fair .......
A. if no process faces starvation.
B. if a process is starved, detect it and run it with high priority
C. if it uses semaphores
D. only if a queue is used for scheduling
8) Which of the following is also known as Double buffering?
A. anticipated buffering
B. buffer swapping
C. circular buffering
D. swapping buffering
9) .......... is the ability of a system to continue functioning in the event of partial system failure.
A. fault avoidance
B. fault tolerance
C. fault detection
D. fault recovery
10) Virtual memory is .........
A. an extremely large main memory
B. an extremely large secondary memory
C. an illusion of extremely large main memory
D. a type of memory used in super computers
11) Error handling and I/O interrupt handling are the functions of ......
A. I/O device Handler
B. I/O traffic controller
C. I/O scheduler
D. I/O buffer
12) In a multi-threaded environment..........
A. each thread is allocated with new memory from main memory
B. main thread terminates after the termination of child threads
C. every process can have only one thread
D. none of the above
13) The kernel keeps track of the state of each task by using a data structure called ......
A. process control block
B. user control block
C. memory control block
D. hardware control block
14) A virtual device is a ..........
A. dedicated for none purpose
B. shared device converted to a dedicated device
C. dedicated device converted to a shared device
D. shared device
15) CPU scheduling is the basis of ...........operating system.
A. batch
B. real time
C. multiprogramming
D. monoprogramming
16) ......... is a high speed cache used to hold recently referenced page table entries a part of paged virtual memory.
A. Translation look a side buffer
B. Inverse page table
C. Segmented page table
D. Indexed page table
17) A technique that smooths out peaks in I/O demand is ........
A. spooling
B. buffering
C. swapping
D. paging
18) In kernel model, the operating system services such as process management, memory management are provided by the kernel.
A. monolithic
B. micro
C. macro
D. Complex
19) A process is said to be in ........... state if it was waiting for an event that will never occur.
A. safe
B. unsafe
C. starvation
D. dead lock
20) Which of the following is an example of spooled device?
A. The terminal used to enter the input data for a program being executed
B. The secondary memory device in a virtual memory system
C. A line printer used to print the output of a number of jobs
D. None of the above
2) D. Process termination and Resource preemption
3) A. context switch
4) C. long term scheduler
5) B. Buffering
6) A. has the values one or zero
7) A. if no process faces starvation
8) B. buffer swapping
9) B. fault tolerance
10) C. an illusion of extremely large main memory
11) A. I/O device Handler
12) B. main thread terminates after the termination of child threads
13) A. process control block
14) B. shared device converted to a dedicated device
15) C. multiprogramming
16) A. Translation look a side buffer
17) B. buffering
18) A. monolithic
19) D. dead lock
20) C. A line printer used to print the output of a number of jobs
A. pages
B. frames
C. blocks
D. segments
2) Which method is used to recover from deadlock?
A. Process termination
B. Resource preemption
C. Resource non-preemption
D. Process termination and Resource preemption
3) Saving the state of the old process and loading the saved state of the new process is called ....
A. context switch
B. static
C. multi programming
D. none of the above
4) The degree of Multiprogramming is controlled by ......
A. CPU scheduler
B. context switching
C. long term scheduler
D. medium term scheduler
5) Input transfers are done in advance and output transfers are done after sometimes in which of these technique?
A. Spooling
B. Buffering
C. Swapping
D. Paging
6) A binary semaphore .........
A. has the values one or zero
B. is essential to binary computers
C. is used only for synchronization
D. is used only for mutual exclusion
7) A scheduling algorithm is fair .......
A. if no process faces starvation.
B. if a process is starved, detect it and run it with high priority
C. if it uses semaphores
D. only if a queue is used for scheduling
8) Which of the following is also known as Double buffering?
A. anticipated buffering
B. buffer swapping
C. circular buffering
D. swapping buffering
9) .......... is the ability of a system to continue functioning in the event of partial system failure.
A. fault avoidance
B. fault tolerance
C. fault detection
D. fault recovery
10) Virtual memory is .........
A. an extremely large main memory
B. an extremely large secondary memory
C. an illusion of extremely large main memory
D. a type of memory used in super computers
11) Error handling and I/O interrupt handling are the functions of ......
A. I/O device Handler
B. I/O traffic controller
C. I/O scheduler
D. I/O buffer
12) In a multi-threaded environment..........
A. each thread is allocated with new memory from main memory
B. main thread terminates after the termination of child threads
C. every process can have only one thread
D. none of the above
13) The kernel keeps track of the state of each task by using a data structure called ......
A. process control block
B. user control block
C. memory control block
D. hardware control block
14) A virtual device is a ..........
A. dedicated for none purpose
B. shared device converted to a dedicated device
C. dedicated device converted to a shared device
D. shared device
15) CPU scheduling is the basis of ...........operating system.
A. batch
B. real time
C. multiprogramming
D. monoprogramming
16) ......... is a high speed cache used to hold recently referenced page table entries a part of paged virtual memory.
A. Translation look a side buffer
B. Inverse page table
C. Segmented page table
D. Indexed page table
17) A technique that smooths out peaks in I/O demand is ........
A. spooling
B. buffering
C. swapping
D. paging
18) In kernel model, the operating system services such as process management, memory management are provided by the kernel.
A. monolithic
B. micro
C. macro
D. Complex
19) A process is said to be in ........... state if it was waiting for an event that will never occur.
A. safe
B. unsafe
C. starvation
D. dead lock
20) Which of the following is an example of spooled device?
A. The terminal used to enter the input data for a program being executed
B. The secondary memory device in a virtual memory system
C. A line printer used to print the output of a number of jobs
D. None of the above
Answers:
1) B. frames2) D. Process termination and Resource preemption
3) A. context switch
4) C. long term scheduler
5) B. Buffering
6) A. has the values one or zero
7) A. if no process faces starvation
8) B. buffer swapping
9) B. fault tolerance
10) C. an illusion of extremely large main memory
11) A. I/O device Handler
12) B. main thread terminates after the termination of child threads
13) A. process control block
14) B. shared device converted to a dedicated device
15) C. multiprogramming
16) A. Translation look a side buffer
17) B. buffering
18) A. monolithic
19) D. dead lock
20) C. A line printer used to print the output of a number of jobs
Related Posts:
Solved MCQ of Operating System Theory set-3
MCQ of Operating System with answer set-4
Solved MCQ of Operating System Set-5
Solved MCQ of Operating System Set-6
Solved MCQ Questions on Operating System set-7
Solved Objective Questions on Operating System set-8
Solved MCQ on Operating System Basis set-9
MCQ on Operating System Fundamental set-10
Interview Questions on Operating System Basis set-11
Objective Questions on Core Operating System set-12